What Is the Price of an Allen Bradley 2711P-T6C20D PanelView Plus 600
2026-09-17
Determining the price of an Allen Bradley 2711P-T6C20D PanelView Plus 600 requires more than a simple web search. As a legacy operator interface terminal that remains widely used in industrial automation, its cost fluctuates based on condition, warranty, availability, and supplier credibility. Feimu specializes in sourcing hard-to-find Allen Bradley components, and this guide breaks down the real market pricing landscape so you can budget accurately and avoid overpaying.
Why Pricing for the Allen Bradley 2711P-T6C20D Varies So Much
The Allen Bradley 2711P-T6C20D is a PanelView Plus 600 color touchscreen terminal with a 6-inch display, Ethernet and serial communication ports, and compatibility with FactoryTalk View ME software. Rockwell Automation has moved this series toward end-of-life status, meaning new old stock is scarce. That scarcity directly affects what buyers pay.
Key price drivers include:
-
Condition – New surplus, refurbished, and used units sit at very different price points.
-
Warranty length – A 12-month warranty adds cost but reduces risk.
-
Stock availability – Immediate shipping commands a premium over long lead times.
-
Supplier specialization – General distributors often markup legacy parts more than focused automation suppliers like Feimu.
-
Accessories included – Power terminal blocks, mounting clips, and communication cables affect value.
Typical Price Ranges for the Allen Bradley 2711P-T6C20D
The table below reflects general market ranges observed across industrial automation channels. Actual quotes depend on current inventory and configuration.
| Condition | Typical Price Range (USD) | Warranty | Best For |
|---|---|---|---|
| New Surplus / New Old Stock | $2,800 – $4,500 | 12 months | Critical production lines |
| Refurbished (Tested) | $1,200 – $2,200 | 6–12 months | Cost-sensitive replacements |
| Used / Pulled | $600 – $1,300 | 30–90 days | Non-critical or backup use |
| Repair Service (Exchange) | $400 – $900 | 12 months on repair | Budget-constrained maintenance |
Feimu provides transparent quotes across these categories, helping you match the right condition grade to your operational risk tolerance.
Factors That Push the Allen Bradley 2711P-T6C20D Price Higher
-
Display condition – Burn-in, dead pixels, or scratches lower value significantly.
-
Firmware version – Certain revisions are preferred for specific FactoryTalk View ME projects.
-
Touchscreen calibration – A responsive, accurately calibrated panel commands a higher price.
-
Documentation and original packaging – These increase resale and compliance value.
How to Evaluate Whether a Price Is Fair
A fair Allen Bradley 2711P-T6C20D price balances unit cost against downtime risk. A $700 used unit with no warranty may cost far more than a $1,800 refurbished unit if it fails during a production run. Always request:
-
Photos of the actual unit, not stock images.
-
Test reports covering display, touch, and communication ports.
-
Clear warranty terms in writing.
-
Confirmation of firmware and catalog number match.
Feimu supplies each unit with documented testing and straightforward warranty coverage.
Allen Bradley 2711P-T6C20D FAQ
Q: Is the Allen Bradley 2711P-T6C20D still available for purchase?
A: Yes, although Rockwell Automation no longer manufactures it as an active product, the Allen Bradley 2711P-T6C20D remains available through new surplus, refurbished, and used channels. Suppliers like Feimu maintain stock for legacy replacements, so buyers can still source units with warranties instead of being forced into a full control system migration.
Q: What is a reasonable price for a refurbished Allen Bradley 2711P-T6C20D?
A: A refurbished Allen Bradley 2711P-T6C20D typically ranges from $1,200 to $2,200 depending on warranty length, included accessories, and cosmetic condition. Units with a 12-month warranty and verified communication ports sit at the higher end, while 6-month warranty options reduce upfront cost for less critical applications.
Q: Can the Allen Bradley 2711P-T6C20D be repaired instead of replaced?
A: Yes, repair and exchange services usually cost between $400 and $900 and often come with a 12-month warranty on the repair. This is a practical option when the housing and display are intact but internal components or the touchscreen have failed, and it avoids the higher cost of sourcing a replacement terminal.
Conclusion
Pricing for the Allen Bradley 2711P-T6C20D PanelView Plus 600 depends on condition, warranty, and supplier expertise. Feimu helps you compare options, verify authenticity, and secure the right unit at a fair price. Contact us today for a current quote, stock availability, and warranty details on the Allen Bradley 2711P-T6C20D and related PanelView Plus components.